Publicité
TOOLS
17 taps for internal threads (one each size):
M3x0.5
M6x0.75
M10x1,25
17 dies for external threads (one each size):
M3x0.5
M6x0.75
M10x1,25
1 adjustable tap wrench
1 tap holder
1 die holder 25 x 9 mm
1 tool holder with sliding handle for taps, M3 - M6, clockwise and counter-clockwise, reversible
1 automatic centre punch
5 screw extractors, heavy-duty, with square drive for tool holders, sizes 1, 2, 3, 4, 5
5 screw extractors, with square drive for tool holders, sizes 1, 2, 3, 4, 5
5 twist drills, HSS, roll forged, titanium nitrated, sizes 2.5 - 3.5 - 4.0 - 5.0 - 6.5 mm
1 screwpitch gauge, 12 blades, metric
1 screwdriver
ATTENTION
Please read and follow these instructions to reach a proper threading and longer tool-life. Taps and
dies are tools of high precision. They are produced from high-quality alloy steel, heat treated and
tempered for a hardness of 58-61 HRC. Check the hardness of your workpiece before starting thread-
cutting by a regular machinist's file. In case the workpiece can be easily filed, you may proceed with
your thread-cutting.
OCCUPATIONAL SAFETY
When using these tools,
always wear following protective equipment:
•
Safety glasses
•
Work gloves
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tap and Die Set | M3 - M12
M3x0.6
M4x0.7
M6x1
M7x0.75
M10x1,5
M12x1,5
M3x0.6
M4x0.7
M6x1
M7x0.75
M10x1,5
M12x1,5
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
M4x0.75
M5x0.8
M7x1
M8x1
M12x1,75
1/8"xNPT27
M4x0.75
M5x0.8
M7x1
M8x1
M12x1,75
1/8"xNPT27
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 70104
M5x0.9
M8x1,25
M5x0.9
M8x1,25
Publicité
