Publicité
Powering On/Off:
Press the Power button to turn your Pro
Keys 2 keyboard on. A green LED will
light briefly. Press and hold the power
button for three seconds to turn your Pro
Keys 2 keyboard off. A red LED will flash
indicating it has turned off.
Pairing the Keyboard with Your Device:
Verify your device's Bluetooth® settings
are on. Press and hold Pro Key 2's
Bluetooth 1 button for three seconds. A
blue LED under the power button will flash
until pairing is complete. Select "ZAGG
Pro Keys 2" from your device's list of
available devices to complete pairing.
To pair a second device, press and hold the
Bluetooth 2 button for three seconds, and
follow the same procedure.
Charging Your Keyboard:
Plug the Type-C end of the charging cable
into the Type-C port on the keyboard (right
side). Plug the other end of your charging
cable into your preferred USB charging
outlet. A red LED light on the battery key
will illuminate to show that your keyboard
is charging. When this light turns off, your
Pro Keys 2 keyboard is finished charging.
Disconnect the charging cable.
Disconnecting Your Keyboard:
First, detach the keyboard from the case.
There are three ways to switch to your
onscreen keyboard:
1. Press the Keyboard Hide/Show button.
2. Turn off the Bluetooth connection from
your device.
3. Turn the Pro Keys 2 keyboard off.
3
Publicité
