Publicité
Welcome
The Pro Keys 2 is comprised of two pieces:
a detachable keyboard and case with
foldable folio cover.
Inserting Your Device into the Case:
Holding your device in landscape mode
with the volume control buttons facing up,
press the top half of your device into the
case and apply light pressure all around to
snap it snuggly into place.
Removing Your Device from the Case:
Hold on to the top lip of the case and press
against the back of the case. Then, grasp
the exposed side of your device and lift/
pull it away from the cover.
Attaching/Detaching the Keyboard from
the Case:
The top of the keyboard and the bottom
of the case are magnetized and will snap
securely together. They can be detached
with a light pull.
The folio-style flap (attached to the case)
is also magnetized. It has a light magnetic
attachment to the back of the keyboard. It
allows the keyboard to slide along the flap
to form a stand but prevents the keyboard
from slipping.
Forming the Stand:
To use the stand function, the keyboard
and case should be connected. Raise
the case (with your device inside) to a
standing 90 angle from the keyboard.
Lift the bottom of the keyboard up off of
the folio-style flap and pull the keyboard
forward (toward you). The stand will unfold
at the back.
2
Publicité
