Publicité
7
4. Connect the Frame Crossbar (4) (5)with the
Upright Leg Unit (7).
Using the screw (C) to connect the Front Frame
Crossbar (4), Back Frame Crossbar (5) with the
Upright Leg Unit (7).
Note: The screws should not be fully locked at the
same time,otherwise it will be difficult to insert the
Bottom Leg Unit (3) (8) in the next step!
Front Frame
Crossbar
7
6. Assembly the Side Table (17).
Using the screw (B) to connect the Side Table (17)
with the Upright Leg Unit (7).
17
3330-A Marathon Ct Charleston, SC 29418
C: Flange screw M6x50, 8PCS
Back Frame
5
4
Crossbar
Back Frame
5
Crossbar
Front Frame
Crossbar
4
B: Flange screw M4x10, 12PCS
Visit Us: Camplux.com
www.camplux.com
5. Assembly the Upright Leg Unit
Using the screw (A) to connect the Upright Leg Unit
(7) with the Left Bottom Leg Unit (Short) (8) and
Right Bottom Leg Unit (Long) (3).
Note: After locking strap(15), tighten all screws.
7
8
7. Assembly the Body(2).
Using Rubber Foot (9) to connect the Body (2) with
the Frame Crossbar (4)(5).
5
17
1(844) 538-7475
A: Flange screw M5x8, 8PCS
Back Frame
5
Crossbar
Front Frame
Crossbar
4
9
4
9
support@camplux.com
15
3
2
Publicité
