Publicité
11
To light
1. Make sure the control knob is in the "OFF" position.
2. Slowly open the valve on the propane gas tank by turning the knob counterclockwise.
3. Push in the control knob and turn to the "LIGHT" position.
4. If ignition doesn't occur within a few seconds release the control knob and rotate to the "OFF" position. Wait for 5
minutes for gas to clear and then repeat the above lighting instructions.
5. Once the fire product is lit, the flame intensity may be controlled by turning the control knob between the"LOW"
and "HIGH" positions.
CAUTION: The gas supply must be turned off at the propane supply cylinder when this appliance is not in use.
● Risk of burns, some parts of the barbecue can get very hot. Allow the barbecue to cool down
sufficiently before cleaning it.
● Excessive accumulation of food residues and cooking fat can lead to a grease fire.
1. First step: Slowly turn the knob counterclockwise to open the valve of the gas tank.
2. Second step: Push in the control knob and turn to the "LIGHT" position counterclockwise.
Do not bend over the cooking area when igniting the
burners.
Each burner can be ignited individually.
3330-A Marathon Ct Charleston, SC 29418
1
Pressure
reducing valve
2
WARNING
WARNING
Visit Us: Camplux.com
www.camplux.com
WARNING
If the burner has not ignited, press the control knob
and turn it back to the 0 position. Wait for 5 minutes
to allow the gas in the combustion chamber to
dissipate. Then press the control knob.
1(844) 538-7475
WARNING
support@camplux.com
Publicité
