Publicité
Proper installation of burner and switch valve's nozzle:
The nozzle of the switch valve must be inside the burner.
The nozzle of the switch valve must be connected to the burner and must not be exposed to air.
Wrong installation:
The nozzle of the switch valve does not be connected to the burner.
WARNING: If "growing" bubbles appear, do not use or move the gas cylinder. Contact an gas supplier or
your fire department!
If a leak is detected, close the pressure regulator lever (b) immediately and tighten the loose connection
or replace the leaking part. Repeat the leak test.
DANGER: Never search for gas leaks using an open flame. Before checking for leaks, make sure that no
sparks or open flames can form in the vicinity. Sparks or flames can cause an explosion which can lead
to serious or even fatal injuries or material damage.
If a leak is detected, close the pressure regulator lever (b) immediately and tighten the loose connection
or replace the leaking part. Repeat the leak test.
3330-A Marathon Ct Charleston, SC 29418
Visit Us: Camplux.com
www.camplux.com
WARNING
WARNING
DANGER
1(844) 538-7475
support@camplux.com
10
Publicité
