Publicité
Troubleshooting
Problem
There is a smell
Leak in the gas system
of gas
Gas cylinder is empty
Cylinder valve is closed
The nozzle on the adjusting
Burner does not
element (behind front panel) is
ignite
not inserted into the burner hose
Other gas system blocked
Pre-heating was too short
Temperature on
grill griddle too
Gas outlets on the burner are
low
blocked
Strong flare-up
Fatty foods
Flashback caused by blockages
Popping or
in the burner
bubbling noise
If the above solutions do not solve your problem, or you need to replace the accessories, please use the phone or
email on the cover to contact us.
3330-A Marathon Ct Charleston, SC 29418
Visit Us: Camplux.com
www.camplux.com
Possible Cause
1(844) 538-7475
Solution
Close the cylinder valve immediatel.
Prevent any flame or spark formation (do not
switch on any electrical appliances).
Tighten all connections on the gas system.
Check all components of the gas system for
visible damage replace defective parts with
original spare parts.
Check for leaks using a leak detector
Replace the gas cylinder
Open cylinder valve
Visual inspection, if necessary adjust
nozzle and connection hose
The gas system should be cleaned by
a specialist
Close the lid and set the flame regulator to
max
Remove blockage from burner
Remove any large areas of fat prior to
barbecuing or place the meat on a grill griddle
plate or reduce the barbecue temperature
Close the cylinder valve immedi-ately.
Wait five minutes and then switch the
barbecue back on.
If the malfunction reoccurs, disassemble and
clean the burner
support@camplux.com
14
Publicité
