Programs
The table below shows which programs are best for the levels of food residue
on them and how much detergent is needed. It also show various information about
the programs. Consumption values and program duration are only indicative except
for the ECO program.
(
)indicates that the program uses rinse aid in the last rinse.
Description
Program
Of Cycle
Pre-wash (45 °C)
Wash (45-55 °C)
Rinse
Auto
Rinse (60 °C )
Drying
Pre-wash
Wash (72 °C)
Rinse
Rinse (70 °C )
HygieneCare+
Drying
Wash (50 °C )
Rinse
Rinse (45 °C )
(*EN60436)
Drying
Pre-wash (30 °C )
Wash (60 °C )
Rinse (55 °C )
Rinse (50 °C )
58 min
Drying
Wash (45 °C )
Rinse (50 °C )
Rapid
Pre-wash (30 °C )
Wash (60 °C )
Rinse
Whisper
Rinse (55 °C )
Drying
Pre-wash
Wash (50 °C)
Rinse (50 °C)
Rinse (50 °C)
Glass
Drying
Wash (72 °C )
Rinse
Rinse (65 °C )
Drying
MachineCare+
NOTE
: The ECO program is suitable to clean normally soiled tableware, that for this
use, it is the most efficient program in terms of its combined energy and water
(*EN60436)
consumption, and it is used to assess compliance with the EU ecodesign
legislation.
Running
Detergent
Time(min)
Pre/Main Wash
4/14g
1 tab
4/18g
18g
1 or 2 tabs
1 tab
18g
1 tab
4/14g
1 tab
12g
1 tab
4/14g
1 tab
4/14g
1 tab
4/14g
1 tab
20
Energy
(kWh)
0.790-
80-150
1.510
159
1.323
215
0.593
58
0.915
30
0.810
270
1.202
120
0.845
150
1.209
Water
Rinse
(L)
Aid
EN
9.8-13.1
13.1
9.0
12.8
9.9
12.8
12.5
9.7