Publicité
safety precautions and usage statements
Safety Features:
Casters (optional leg accessory) are equipped with locking
wheels to prevent unwanted movement. Even when locked and
unable to roll, it is possible for the casters to slide. Free release
head and foot motors are designed to lower the mattress by
retracting only with gravity, never pulling downwards, which
minimizes pinch points.
Product Ratings:
The lift motors are not designed to operate continuously for more
than [2] minutes in an [18] minute time period or approximately
10% duty cycle. Attempting to circumvent or exceed this rating
will shorten the life expectancy of the product and may void the
warranty.
Weight Limits:
This product is not rated to support weights exceeding 850
pounds. This product is not rated to support weights in excess of
850 pounds inclusive of the mattress and bedding. The base will
structurally support this weight, provided it is evenly distributed
across the bed base. The adjustable base is not designed to
support or lift this amount in the head or foot sections alone.
Exceeding this weight restriction could damage the bed and/or
cause injury and will void the warranty.
Acoustics:
The massage function will emit a noticeable tone during
operation. As the massage intensity level is increased, the tone
will intensify. The volume of this tone is directly related to the
location environment. For example, when demonstrated in a
show room, the surrounding environmental noise will cover some
of the massage noise. However, when installed in a home setting
2
with wooden floors, carpeted or not, the massage volume will be
more noticeable.
In normal base operation, the wheels which allow the bed to
maintain its distance from the wall, will make contact with the
steel platform supports of the base creating a contact noise.
When entering, exiting or shifting weight on the base, this contact
noise may be audible as the wheels make contact. This is normal.
SAVE THESE INSTRUCTIONS.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
To comply with the FCC RF exposure requirements, no change to
the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure
requirement and void user's right to operate the device.
Radio Frequency: 2.4 GHz
parts list
Before discarding the packing materials- ensure all the parts are accounted for.
All electronics and components that need to be installed are
located in boxes under the base or attached to the frame.
A)
Wireless Remote Control and (3) AAA batteries
B)
Mattress Retainer Bar (1)*
C)
Legs (4)
D)
Power Cord (1)
E)
Power Supply (1)
F)
Power Down Box (1)*
G)
Connecting Strap*‡
H)
SmartSync™ Cord (1) ‡
Headboard Bracket Components:
I)
Headboard Bracket (2)
J)
T-Bracket (2)
K)
Spacers (2)
L)
Long Bolts (8)
M)
Short Bolts (10)
N)
Nuts (18)
Misc Parts (not included):
O)
Surge Protector (1)
P)
9 Volt Batteries (2)
*
These items are attached to the base for shipping purposes. Carefully
remove from base and set aside.
‡
Only included in Twin, Twin Long, Queen Split and Cal King Split bases.
A)
B)*
C)
D)
E)
F)*
G)*
H)
‡
‡
HEADBOARD BRACKET COMPONENTS
I)
J)
K)
L)
M)
MISC (NOT INCLUDED)
O)
P)
N)
3
Publicité
