Publicité
Setting the time
Unscrew crown X by turning it downwards (
it into position X3. Turn the crown upwards (
the hands forward, or downwards (
backwards, and set the watch to the desired time.
For accurate time-setting, ensure that the last operation
was done in a clockwise direction. Then push the crown
back to position X2.
After this operation, rotate the crown downwards (
make sure it turns freely.
Then apply pressure on the crown and screw it back into
position X1 by turning it upwards (
Your MARINE 5577 is guaranteed to be water-
resistant to 10 bar (100m), as long as the crown is
in position X1 (screwed).
), then pull
English
) to move
) to move the hands
) to
).
Publicité
