Storage; Accessory And Tool Storage; Recycling The Machine; Maintenance - Flex VCE 33 L MC Notice D'utilisation D'origine

D
FLEX VCE 33 L MC / VCE 33 L AC / VCE 44 L AC / S 44 L AC
GB
4.3

Storage

F
NL
Store the appliance in a dry place, protected
from rain and frost. The machine shall be
I
stored indoors only.
N
4.4

Accessory and tool storage

S
For convenient transport and storage of accesso-
ries or tools, integrated rails are found on side of
DK
machine which allows fastening with straps or other
means. A flexible strap and hooks are included on
SF
back of machine for attachment of suction hose or
mains cable. For instruction see quick reference
E guide.
An optional adapter plate
P
can be installed on top of machine for fastening of
2-point or 4-point storage cases.
GR
Remove the electrical plug from the socket before
installing the adapter plate.
TR
SLO
Do not lift machine in adapter plate without
having storage case safely installed. Note the
HR
weight and balance of the appliance in case of stor-
age. Maximum weight of storage cases is 30 kg.
SK
CZ
4.5

Recycling the machine

Make the old machine unusable.
PL
1. Unplug the machine.
2. Cut the power cord.
H
3. Do not discard of electrical appliances with
household waste.
RO
As specified in European Directive 2012/19/EU
on old electrical and electronic appliances,
BG
used electrical goods must be collected sepa-
rately and recycled ecologically.
RUS
EST
5

Maintenance

LV
5.1

Regular servicing and inspection

LT
Regular servicing and inspection of your machine
must be carried out by suitably qualified personnel in
JA accordance with relevant legislation and regulations.
In particular, electrical tests for earth continuity, in-
sulation resistance, and condition of the flexible cord
ZH
should be checked frequently.
In the event of any defect, the machine MUST be
KO
withdrawn from service, completely checked and
repaired by an authorized service technician.
TH
MS
16
AR
107417670_UM_FLEX_VC33-44L_2017-07-24.indb 16
CAUTION
*) with attachment system
CAUTION
*)
At least once a year, a Flex technician or an instruct-
ed person must perform a technical inspection in-
cluding filters, air tightness and control mechanisms.
5.2 Maintenance
Remove the plug from the socket before performing
maintenance. Before using the machine make sure
that the frequency and voltage shown on the rating
plate correspond with the mains voltage.
The machine is designed for continuous heavy work.
Depending on the number of running hours – the
dust filter should be renewed. Keep the machine
clean with a dry cloth, and a small amount of spray
polish.
During maintenance and cleaning, handle the ma-
chine in such a manner that there is no danger for
maintenance staff or other persons.
In the maintenance area:
• Use filtered compulsory ventilation
• Wear protective clothing
• Clean the maintenance area so that no harmful
substances get into the surroundings
During maintenance and repair work all
contaminated parts that could not be cleaned
satisfactorily must be:
• Packed in well sealed bags
• Disposed of in a manner that complies with valid
regulations for such waste removal.
For details of after sales service contact your dealer
or Flex service representative responsible for your
country. See reverse of this document.
*) Optional accessories / Option depending on model
Original instruction
23.07.2017 17:38:34