Auto-On/Off Socket Outlet For Power Tools; Manualclean *); Autoclean *); Antistatic Connection *) - Flex VCE 33 L MC Notice D'utilisation D'origine

D
FLEX VCE 33 L MC / VCE 33 L AC / VCE 44 L AC / S 44 L AC
GB
5. Attach suitable nozzle to the tube. Choose noz-
F
zle depending on what type of material that is to
be picked-up.
NL
6. If used for dust extraction in connection with
dust producing tool then connect end of suction
hose with appropriate adapter.
I
7. Connect the plug into a proper electrical outlet.
8. Put the electrical switch into position I in order to
N
start the motor.
S
Turn I:
Activate the machine
Turn clockwise for suction power
DK
control
SF Turn 0:
Stop the machine
E Turn
Activate Auto-On/Off operation
Turn counterclockwise for suction
P
power control
Turn I:
GR
Activate the machine
Turn
TR
Stop the machine. Permanent power
on socket
SLO
Turn
Activate Auto-On/Off operation
HR
Turn I +
Activate the machine with
SK
deactivated automatic filter cleaning
function
CZ
Turn
PL Activate Auto- On/Off operation
with deactivated automatic filter
cleaning function
H
Suction power control operation on
separate turning knob
RO
BG
3.2

Auto-On/Off socket outlet for power tools

RUS
Appliance socket.
EST
The appliance socket is designed for electrical
auxiliary equipment; see technical data for refer-
LV
ence.
LT
1. Prior to plugging in an appliance, always switch
off the machine and the appliance that is to be
connected.
JA
2. Read the operating instructions to the appliance
to be connected and observe the safety notes
ZH
contained in these.
KO
An appliance socket with earthing contact is inte-
grated in the machine. An external power tool can
TH
be connected there. The socket features permanent
MS
14
AR
107417670_UM_FLEX_VC33-44L_2017-07-24.indb 14
:
:
:
Off:
+ Off:
CAUTION
power on, when the electrical switch is in position
, i.e. the machine can be used as an extension
cord.
In position the machine can be switched on
and off by the power tool connected. Dirt is picked
up from the source of dust immediately. To comply
with regulations, only approved dust producing tools
should be connected.
The maximum power consumption of the connected
electrical appliance is stated in section "Specifica-
tions".
Before turning the switch to position
that the tool connected to the appliance socket is
switched off.
3.3 ManualClean *)
The "MC" machine is equipped with a semi auto-
matic filter cleaning system, ManualClean. The filter
cleaning system must be actuated latest when the
suction performance is no longer sufficient. Regular
use of the filter cleaning feature maintains suction
performance and increases the lifetime of the filter.
For instruction see quick reference guide.
3.4 AutoClean
*)
The "AC" machine is equipped with an automatic fil-
ter cleaning system, AutoClean. A frequent cleaning
cycle will automatically run during operation to en-
sure that suction performance is always at its best.
If suction performance decreases or in extensive
dust applications a manually filter cleaning operation
is recommended:
1. Switch off the machine.
2. Close the nozzles or suction hose opening with
the palm of your hand.
3. Turn the switch to position „I" and let the ma-
chine operate at full speed for approx. 10 sec-
onds with the suction hose opening closed.
If suction power is still reduced take out the filter and
clean mechanically or replace filter.
For certain applications, like wet pick up, it is recom-
mended to turn off the automatic filter cleaning sys-
tem. For details see chapter 3.1.
3.5 Antistatic connection
CAUTION
The machine is equipped with an antistatic
system to discharge any static electricity that
may develop during dust pick-up.
The antistatic system is placed in front part of the
motor top and creates an earth ground connection to
the inlet fitting of the container.
For proper function the use of an electrical conduc-
tive or antistatic suction hose is recommended.
*) Optional accessories / Option depending on model
ensure
*)
Original instruction
23.07.2017 17:38:34