Publicité
3) Press the "Microwave power" but-
ton (Q) once and the display will
show "PL10". Then press the but-
ton "8" on the numerical panel (L);
the display will show "PL8".
4) Press the "Start / +30 sec." button
(N) to save setting. The buzzer will
ring once. By pressing the "Start
/ +30 sec." button (N) again, the
procedure will be saved as memory
"2".
Note:
If the appliance is unplugged during
the setting process, the procedure
must be repeated.
To carry out the procedure saved,
press the "0 / Memory" button (M)
twice, the display will show "2". Press
then the "Start / +30 sec." button (N)
to start cooking.
SAFETY FUNCTION FOR
CHILDREN
- To stop the appliance, keep pressed
the "Stop/Cancel" button (O) for 3
seconds; the appliance will emit a
long sound indicating the start of
the safety state for children and the
display will show the symbol "
- To unlock the appliance, keep
pressed the "Stop/Cancel" button
(I) for 3 seconds; the appliance will
emit a long sound.
INFORMATION SHOWN WHILE
COOKING
- During microwave cooking or cook-
ing with pre-set menus, pressing
the "Clock / Kitchen Timer" button
(G), the display will show the cur-
rent time for 3 seconds.
- During microwave cooking or cook-
ing with pre-set menus, pressing
the "Microwave power" button (Q),
the display will show the current
time of microwave for 3 seconds.
After three seconds, the oven will
go back to the previous state.
USEFUL INFORMATION
- Press the "Start/+30 sec." button
(N) to continue cooking if the door
is opened during cooking.
- Once having set a cooking pro-
gram, the display will show the
corresponding setting.
- In operation or pause state, the
display shows the remaining cook-
ing time.
- The "beep" sound will be emitted
five times to indicate the end of
cooking.
cleaning and
maintenance
ATTENTION:
NEVER IMMERSE THE APPLIANCE
BODY, THE PLUG AND THE POWER
CORD
IN
LIQUIDS, USE A DAMP CLOTH FOR
CLEANING.
EVEN WHEN NOT IN USE, UNPLUG
THE APPLIANCE BEFORE MOUNTING
OR REMOVING THE SINGLE PARTS
OR BEFORE CLEANING.
- The oven cavity must always to be
clean. When there are food/liquid
residues inside the oven, clean the
sides with a damp cloth. If the oven
is very dirty, a mild detergent may
be used. Avoid sprayers or too
aggressive detergents as they may
".
leave stains or strips or opacify the
door surface.
- The outside surface are to be
cleaned with a damp cloth only. To
prevent the operating parts inside
the oven from damaging, there
must be no water traces in the
ventilation openings.
- Often clean the door and the win-
dow on both sides, the sealed
locks and the parts nearby, using
a damp cloth, to remove squirts or
residues. Do not use an abrasive
detergent in any case.
- The control panel must always be
dry. Clean it with a soft, damp cloth.
When carrying out this procedure,
leave the door open to prevent the
oven from starting accidentally.
- Wipe steam from the inner/outside
part of the door by means of a soft
cloth. This may occur when work-
ing in high-humidity conditions and,
therefore, it is normal.
- Sometimes, it is necessary to
remove the glass base to clean it.
12
WATER
OR
OTHER
Publicité
