Publicité
Meat
- Press repeatedly the "Meat" but-
ton on the panel (P) of the pre-set
cooking functions until the display
(E) shows the required type of
meat:
"CHIC": chicken
"BEEF": beef
"PO": pork
- Press the "Start / +30 sec." button
(N) to confirm the type of meat; the
display (E) will show:
"400" for chicken
"300" for beef
"150" for pork
- Press the "Meat" button on the
panel (P) to set the food weight:
"600","800","1000" or "1200" g for
chicken
"500","700","900" or "1100" g for
beef
"300","450","600" or "750" g for
pork
- Press the "Start / +30 sec." button
(N) to start cooking. The buzzer will
beep once. At the end of cooking,
the buzzer will beep five times.
Frozen pizza
- Press repeatedly the "Frozen veg-
etables" button on the panel (P)
of the pre-set cooking functions
until the display shows the required
weight ("100", "200", "400" g will
appear in sequence).
- Press the "Start / +30 sec." button
(N) to start cooking. The buzzer will
beep once. At the end of cooking,
the buzzer will beep five times.
PLATE HEATING UP FOR DINNER
- Press repeatedly the "Dinner Plate"
button (H) until the display shows
the required weight of the dinner
plate ("250", "350", "500" g will
appear in sequence).
- Press the "Start / +30 sec." button
(N) to start cooking. The buzzer will
beep once. At the end of cooking,
the buzzer will beep five times.
MULTI-FUNCTION COOKING
For this kind of cooking, it is possible
to set max. 2 functions.
If one of these is the defrosting one,
set it as first function.
Note: the automatic cooking can-
not operate in the several-step
cooking.
Example: when it is required to cook
at 80% power for 5 minutes and then
with 60% of microwave for 10 min-
utes. The cooking stages are:
- Press the "Time Cook" button (R)
once, and then press the buttons
"5", "0", "0" in sequence on the
numerical panel (L) once to set
cooking time;
- Press the "Microwave power" but-
ton (Q) once, and then the button
"8" on the numerical panel (L) to
select 80% of microwave power.
- Press the "Time Cook" button (R)
once, and then press the buttons
"1", "0", "0", "0" in sequence on
the numerical panel (L) once to set
cooking time;
- Press the "Microwave power" but-
ton (Q) once, and then the button
"6" on the numerical panel (L) to
select 60% of microwave power.
- Press the "Start / +30 sec." button
(N) to start cooking.
"Memory" (function storage)
- Press the "0-Memory" button (M) to
select the storage procedure 1-3.
The display (E) will show 1, 2, 3.
- If the procedure has been set,
press the "Start / +30 sec." button
(N) to use it. Otherwise, continue
setting the procedure. Just one or
two phases can be set.
- After having completed the setting,
press the "Start / +30 sec." button
(N) once to save the procedure. By
pressing the "Start / +30 sec." but-
ton (N) again, cooking will start.
Example: set the following procedure
as second memory, that is memory
2 and cook food with 80% of micro-
wave power for 3 minutes and 20
seconds.
1) press the "0-Memory" button (M)
twice until the display will show
"2".
2) Press the "Time Cook" button (R)
once, and then press the buttons
"3", "2", "0" in sequence on the
numerical panel (L).
11
Publicité
