Publicité
1.
General
Artidor's explosion-safe SpotLED combines high-performance and energy-efficiency with
state-of-the-art LED technology, making it suitable for a wide range of applications. The
robust SpotLED can successfully be applied on construction sites, transport vehicles,
forklifts, lathes, or milling machines or for the illumination of facades.
The SpotLED is available with LED optics with an angle of 10° (spotlight), 38° (wide-angle
light), or a combination of both (work light). The cable has a standard length of 5 meters. Due
to the stainless steel bracket and the large 155° rotation angle, the SpotLED is suitable for
mounting against walls or sloping surfaces.
Artidor's SpotLED is certified in accordance with European Directive 2014/34/EU (ATEX 114)
for use in hazardous areas and is CE marked.
2.
Safety Instructions
The AR-040 SpotLED is an explosion-safe product suitable for use in
hazardous areas with explosion hazard from flammable gases, vapors, mist
and dust, classified as Zone 2 or Zone 22.
This manual must be read and understood for safe use of the SpotLED. All warnings and
instructions must be followed.
•
Installation must be carried out by personnel trained and qualified in explosion safety
taking the instructions mentioned on the equipment and in this manual into
consideration. Local regulations that apply to the installation must be followed.
•
Connect this equipment to the direct current supply voltage for which it is designed.
•
Isolate electrical power to the SpotLED before electrical installation.
•
The transparent lens can be electrostatically charged. Only use a damp cloth to clean
the lens. Do not use solvents.
•
Do not install the equipment in an environment where prolific charge generating
mechanisms (e.g. pneumatic transfer of powders, charge spraying in the powder coating
process) are present to avoid high levels of surface charge on the equipments plastic
parts.
•
Either decommission the SpotLED or do not use it when it is damaged.
•
During installation of the SpotLED national safety regulations must be observed.
•
Only use the SpotLED under the environmental conditions for which it is specified.
Deviating environmental conditions can contribute to damage to the equipment and may
lead to possible danger to the life of the user.
Installation manual AR-040 SpotLED
E
12-2024
7 / 40
Publicité
