Télécharger Imprimer la page

Brandt UM1000H Guide D'installation Et D'utilisation page 13

Publicité

REVERSING THE DOOR OPENING DIRECTION
You can reverse the direction of opening of
the door (left instead of right):
The appliance must always be
disconnected when you change the door
opening direction.
1. Remove the top of the fridge: remove the
2 screw covers on the top, remove the 2
screws and slide the top forwards.
2. Slightly tilt the appliance towards the rear
and wedge it in this position.
3. Unscrew the screws from the door upper
hinge and remove the hinge support and
pin.
4. Slightly open the door and extract it from
its lower hinge.
GENERAL DESCRIPTION
Note:
your freezer may differ slightly from this picture
5. Unscrew the lower pin and screw it in
on the opposite side. Insert the door in
the pin and close it.
6. Firmly screw the upper hinge to the
opposite side and the door pin. Fit the
fridge top (carry out point 1 in reverse).
Thermostat
Drawers
.
13

Publicité

loading