Publicité
MAKE SURE TO FOLLOW THE STEPS BELOW
FOR A SUCCESSFUL & EASY ASSEMBLY
TIP: To ensure the final unit is secure and sturdy, it is highly
recommended to secure each component with the zip ties provided
after connecting each component together in the steps.
5
6
Fig.A
TO ASSEMBLE:
1. Remove all components from the box and lay flat on the floor.
2. Connect the Head (B) to the Body (C) by inserting the metal
posts from the Head(B) into the corresponding metal
cylinders.(FIG.A STEP 1)
06
4
5
1
2
3
Fig.B
3. Connect the Leg (D) to the body (C) by inserting the metal posts
from the Leg (D) into the corresponding metal cylinders.(FIG.A
STEP 2)
4. Connect the Leg (D) to the Support Bar (G) by inserting the
metal posts from the Leg (D) into the corresponding metal
cylinders.(FIG.A STEP 3)
5. Connect the Hat (A) to the Head (B) by inserting the metal posts
from the Hat (A) into the corresponding metal cylinders.(FIG.A
STEP 4)
6. Connect the Arm (E) to the Body (C) by inserting the metal posts
from the Arm (E) into the corresponding metal cylinders.(FIG.A
STEP 5)
7. Connect the Sword (F) to the Arm (E) by inserting the metal
posts from the Sword (F) into the corresponding metal
cylinders.(FIG.A STEP 6)
8. Secure the installing points with plastic ties (H) and secure the
base to the soft ground by fully inserting the ground stakes (I)
into the ground.
9. Plug the light set into a power outlet.
SAVE THESE INSTRUCTIONS
MADE IN P.R.C
07
Publicité
