Publicité
14
INSTALLATION
Removing the Right Refrigerator Door
(1)
1
Open the door. Remove the top hinge cover screw (1).
Lift up the cover (2).
2
Remove the cover.
3
Rotate the hinge lever (3) clockwise. Lift the top hinge (4)
free of the hinge lever latch (5).
4
Lift the door from the middle hinge pin and remove the
door.
5
Place the door, inside facing up, on a non-scratching
surface.
CAUTION
When lifting the hinge free of the latch, be careful that
the door does not fall forward.
All manuals and user guides at all-guides.com
(2)
(3)
(4)
(5)
Assembling the Right Refrigerator Door
Install the right-side door first.
1
Lower the door onto the middle hinge
pin. Make sure that the plastic sleeve is
inserted into the bottom of the door.
(1)
(3)
2
Fit the top hinge (4) over the hinge lever
latch (5) and into place.
3
Rotate the lever (3) counterclockwise to
secure the hinge.
4
Hook the tabs on the right side of the
hinge cover (2) under the edge of the top
hinge (4) and position the cover in place.
5
Insert and tighten the cover screw (1).
(2)
(4)
(5)
Publicité
