Publicité
GROUNDING
Improperly connecting the ground-
WARNING
ing wire can result in the risk of
electric shock. Check with a qualified electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the station. Never remove the ground-
ing prong from the plug. Do not use the station
if the cord or plug is damaged. If damaged, have
it repaired before use. If the plug will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
Stations with Three Prong Plugs
Stations marked "Grounding Required" have a
power strip with a three wire cord and three prong
grounding plug. The plug must be connected to a
properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user,
reducing the risk of electric shock.
The grounding prong in the plug is
connected through the green wire
inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
electrically "live" terminal.
Your power strip must be plugged into an appropriate
outlet, properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet
should look like those in Figure A.
SYMBOLOGY
Warning
Read Operator's Manual
Electrical Shock Hazard
Do not open more than one drawer at a
time. Station may tip, causing injury.
Lock wheels when station is not being
moved. Unlocked wheels can allow the
station to move unexpectedly.
Do not use drawers as steps. Station
may tip, causing injury.
FPO
Lock all drawers before moving the station.
Do not step on side shelf. Shelf may
collapse or break. Station may tip, causing
injury.
Cat. No. ..............................................48-22-8562A
Two-Slide Drawer Capacity .........100 lbs. (45.4 kg)
Four-Slide Drawer Capacity ........200 lbs. (90.7 kg)
Peg Board Capacity.....................200 lbs. (90.7 kg)
Storage Shelf Capacity ................100 lbs. (45.4 kg)
Total Capacity .......................3,000 lbs. (1360.8 kg)
AC Input Volts ....................................................120
Hertz ....................................................................60
Amps ...................................................................15
USB Output Volts...................................................5
USB Watts ........................................................10.5
USB Amps ..........................................................2.1
Recommended Ambient Operating
Temperature ...........0°F to 104°F (-18°C to 40°C)
3
Fig. A
4
5
6
7
1. Peg board
2. Wood work surface
3. Tool hanger
4. Cabinet shelf
5. Cabinet shelf clip
6. Key
7. Lock
8. Rigid caster
9. Drawer divider
10. Tool organizer
3
SPECIFICATIONS
FUNCTIONAL DESCRIPTION
1
2
19
10
11
8
9
11. Drawer slide
12. Swivel caster with
13. Bumper
14. Storage shelf
15. Charger mounts
16. Cord storage brackets
17. Side handle
18. Power strip
19. Peg board bracket
19
18
17
16
15
14
12
13
12
brake
Publicité
