Publicité
5.
In the heating process, if the temperature indicator flashes, there indicates the setting
heat temperature; if this indicator is on, the water temperature has been up to or above
this setting value;
6.
Others
If the insulation function has been not selected, the kettle will be lifted up from the base to
enter into the standby state, so the program will be initialized.
In case of the insulation function selected, if the kettle is lifted up from the base, this state
before lifting will be kept; if the base can not detect the kettle within one minute, the beep
sound will be given to enter into the standby state and the program will be initialized; if the
base can detect it within one minute, the front lifting will continue on.
In standby mode, all LEDs are off and the heating process stops.
In standby mode, if there is no kettle on the base, all buttons and indicators disable.
Fig. 6
FAULT STATE DESCRIPTION:
1.
In case of NTC short-circuit, all indicators flash and the heating process stops, so all
buttons will disable.
2.
In case of NTC open-circuit, all indicators flash and the heating process stops, so all
buttons will disable.
3.
In case of kettle dry burning, all indicators flash and the heating process stops, so all
buttons will disable.
Fig. 7
Fig. 8
Publicité
