Publicité
2 - Remove the plastic caps and pearl cotton on the end of each part. If
they were broken or missing during transportation, please don't worry,
they are just for protecting the pole.
Insert the trunk in the base as indicated. When the trunk consists of more
than one part, begin by inserting into the base (Part D) the part of trunk
carrying the longest branches (Part C), as successively to assemble the
other parts of trunk ( Part B), by ending with the smaller branches (Part A)
at the top of the tree.
5 FT/150 CM
TREE
3 - Unfold one by one the branches beginning by the lower branches.
Each branch tip must be shaped to it's proper position to give the tree a
natural look. This is done by gently grasping the left and right wing tips
and spreading them out away from the centre tip. For fast shape tree, it
features 100% memory wire construction with interlocking sections that
spring into fullness.
During the shaping, the snow powder and leaves may drop down.
08
6 FT, 7 FT, 7.5 FT,
8 FT TREE (180 CM,
210 CM, 225 CM,
240 CM TREE)
4 - Make final adjustment and trimming to the tree.
5 - Connect the lights to power line (Part E). Each tree section has a light
string cord with red ribbon that will be convenient for you to find them.
Then plug each cord into a receptacle on the power line. Note that the
male and female connectors will only connect in one direction. After
connection, twist closed each connector nut securely. For quick connection
tree, the cord and power line are already connected, you just need to
connect the Part A, Part B and Part C, and plug the adapter into the power
supply then the lights will turn on.
5 FT/150 CM
TREE
Tips:
The remote controller is only for multi lighting modes LED lights, like 9
lighting modes and APP controlled LED lights.
You can use it to control lights.
The tree is now ready to be decorated. Ensure that the decorations are
uniformly distributed on the tree.
6 FT, 7 FT,
7.5 FT, 8 FT
TREE
(180 CM,
210 CM,
225 CM,
240 CM
TREE)
09
Publicité
