General information:
• 160 mm is the minimum bottom diameter
of the cookware for this function.
• Heat setting display for the left rear control
bar shows the position of the cookware on
the induction cooking area. Front
middle
, rear
• Heat setting display for the left front
control bar shows the heat setting. To
change the heat setting use left front
control bar.
• When you activate the function for the first
time you will get heat setting
front position,
and
for the rear position.
7. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones a strong
electro-magnetic field creates the heat in
the cookware very quickly.
18
ENGLISH
.
for the
for the middle position
You can change the heat settings for each
position separately. The hob will
remember your heat settings next time
you activate the function.
,
Activating the function
To activate the function place the cookware in
the correct position on the cooking area.
Touch
. The indicator above the symbol
comes on. If you do not place the cookware
on the cooking area
minutes the flexible induction cooking area is
set to
.
Deactivating the function
To deactivate the function touch
heat setting to
symbol
goes off.
Use the induction cooking zones with suitable
cookware.
• The bottom of the cookware must be as
thick and flat as possible.
• Ensure pan bases are clean and dry
before placing on the hob surface.
• In order to avoid scratches, do not slide or
rub the pot across the ceramic glass.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
comes on and after 2
or set the
. The indicator above the