Publicité
next startup; no need to set it again.ECO: Energy-saving cooling MAX:
Powerful cooling.
Water injection operation
1. Press the door cover button of the ice maker to open the door
cover and remove the ice basket and ice shovel. Pour the water
into the sink, the water level should not exceed the MAX position,
and the water injection is about 1L. After adding water, put the ice
basket back into the ice machine and close the door cover.(Make
ice according to the first point of function, and the basket is about
1.2L)
2. Water quality requirements: the hardness of the water quality is less than
250ppm.
- 7 -
Publicité
