Publicité
2.Check if the power switch on the operation panel is turned on.
3.Check if the cooling ventilation is normal.
4.Check if the fuse is blown.
Poor Cooling Performance
1. Check if the lid is closed correctly.
2. Check if the door seal is damaged or deformed.
3. Check if there is poor ventilation around the fridges.
4. Check if the temperature is set correctly.
△Definition of Error Codes on the Display
Error Code
E1
E2
E3
E4
E5
E6
Abnormal Noise
1.The car refrigerator is not placed smoothly.
2.Touch a wall or other object.
3.There are parts loose or falling off inside.
Condensation on Refrigerator Surface
When the ambient air humidity exceeds 75%, slight condensation will
occur on the box surface, which is normal.
△E1: Low Input Voltage
Failure 1: Insert the refrigerator power cord into the cigarette lighter before
the car starts. Solution 1: Wait a while to connect the car after it starts.
Failure 2: The input voltage of the adapter is too low.
Compressor start failed
Low Rotational Speed of Compressor
Controller module temperature too high
Open or Short Circuit of NTC
Failures and Solutions
- 9 -
Error Type
Low Input Voltage
Fan Fault
Publicité
