Publicité
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
CORRECT DISPOSAL
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed
through indicates that the product requires separate refuse
collection in the European Union. This applies to the product
and all accessories marked with this symbol. Products marked
as such may not be discarded with normal domestic waste, but
must be taken to a collection point for recycling electrical and
electronic devices
IMPORTANT SAFEGUARDS
WARNING ： A procedure, which, if not properly followed, may cause
injury to the operator or others in the operating area.
Equipment Identification
The identification number specification or model, and serial number of this unit
usually appears on a nameplate attached to the control panel, record these
numbers for future reference.
Receipt of Equipment
When you receive the equipment, check it against the shipping documents, Make
sure it is complete and inspect the equipment for possible damage during shipping,
if there is any damage, notify the carrier immediately to file a claim.
Furnish complete information concerning damage claims or mistake(s) in shipment
to Machinery Co.,Ltd's Include the equipment identification number along with a
description of the parts in question.
Move the equipment to the installation site before uncrating the unit. Use care to
avoid damaging the equipment when using bars, hammers, etc.to uncrate the unit.
- 2 -
Publicité
