Publicité
Instruction CF-RU Repeater Unit
4. Transmission Test
Initiate transmission test on the Repeater Unit – g 4
•
Press the push button
•
LED
goes ON
Link test is satisfactory
•
LED
goes OFF
•
Mount the front cover again
Link test is unsatisfactory
•
LED
ashes 5 times
No transmission to room / Repeater Unit
•
Try to relocate the Repeater Unit
•
Or install one or up to three Repeater Units and place them
between the Master Controller and Room Thermostat
VI.UH.N1.52
Produced by Danfoss Floor Heating Hydronics 08.2008
9
Publicité
