Publicité
Preparation
This product includes a GLASS panel! Always use extreme caution when handling
glass. Failure to do so could result in personal injury or property damage.
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts
and assembly steps are grouped for wall-hanging or recessing use. Check the parts list to make sure
nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
You will need the following tools (not included): Phillips screwdriver; stud finder; level; tape
measure; electric drill; 1/4" wood drill bit, hammer.
Parts and Hardware
A – Fireplace
E-Wall Bracket
Fixed on back of firebox
Specification and Dimension
F-Decorative
G-Decorative
Pebbles
Crystals
www.aflamo.com
B – Wood Screws
Remote Control
H - Log set
Description
Type
Voltage
Watts
Amps
C – Drywall anchors
D - Metal Bracket
I - Plastic Tray
Electric Fireplace
3 Way Mounting Unit
Wall-Mount, Recess into
Wall and
Assemble with mantel
220 - 240 V AC
1400 - 1600 W
7 AMP Grounded Circuit
3
Publicité
