Publicité
Control Panel / Remote Control Operation
BUTTON
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
POWER
remote control. Turns off flame effect.
TIMER button: Controls timer settings to
turn off fireplace at selected time.
Settings range from 0.5 hours to 8 hours.
TIMER
FLAME button: Makes flame effect
dimmer and brighter.
NOTE: Flame effect stays on until power
button is turned off. Flame effect must be
FLAME
on for heater to turn on.
COLOR button: Makes the color flame
effect changing.
NOTE: color effect stays on until power
button is turned off. Color flame effect
COLOR
must be on for heater to turn on.
HEATER button: Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: To prevent overheating, the heater
HEATER
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
TEMPERATURE button: Turns heater on
and off.
NOTE: Press & Hold the button for 5 seconds,
the temperature setting will switch from ℃ to ℉.
Same way from ℉ to ℃。
TEMP
FUNCTION
www.aflamo.com
ACTION & INDICATION
Press once. Indicator light turns on.
1.
Power turns on. All functions enabled.
2.
Press again. Flame effect turns off.
Power and all functions turn off.
Press once. Indicator light turns on.
1.
Timer is set to 0.5 hours.
2.
2. Press again until desired setting is
reached. Display window shows setting.
1. Press once. Indicator light turns on.
Flame brightness effect gets changing.
2. Press again. until desired setting is
reached.
1. Press once. Indicator light turns on.
Flame color effect gets changing.
2. Press again until desired setting is
reached.Display window shows setting.
Press once. Indicator lights up.
1.
Fan blows cool air for 10 seconds. Low
heater turns on and blows warm air.
2.
Press again. Indicator lights up.
High heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air, then turns off.
1. Press once: Indicator lights up.
Temperature goes to 18
2. Press again: until desired setting is
Reached. Digital display shows setting
circles as below:
℃
11
Publicité
