Publicité
STEERING WHEEL BATTERY INSTALLATION AND
REPLACEMENT DIAGRAM
1. The battery compartment is located in the middle of the dashboard.
2. Use a screwdriver to loosen the screws and remove the battery box cover.
3. Remove the battery cover.
4. Install 2 pieces of size 5 AA batteries (1.5V), and place them according to the
symbols displayed (+,-).
5. Close the cover and tighten the screws.
6. To remove batteries, reverse steps 2 and 3.
Precaution on installation of batteries
1. Battery must be handled by adults only.
2. Always remove dead batteries.
3. Only use AA batteries.
4. Alkaline batteries are recommended.
5. When the product is not being used for a while, remove the batteries.
6. When changing batteries, ensure they are all changed with new ones.
7. Do not mix old and new batteries.
8. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
9. Do not throw batteries into a fire – they could explode or leak.
10. Do not charge non-rechargeable batteries.
11. Before charging, remove chargeable batteries from the product.
12. Adult supervision is required when charging batteries.
13. Insert batteries with the correct polarity.
14. Ensure supply terminals are not short-circuited
7
Publicité
