Publicité
ASSEMBLY INSTRUCTIONS
4. Secure the front panel (F) by inserting bolts
(AA) through washers (BB) and into predrilled
holes in the front panel (F) and tightening.
5. Slip the top panel (A) over completed
assembly until snug. From inside, insert bolts
(AA) through washers (BB), into predrilled
holes in the front and sides of completed
assembly and tighten.
6. Lay the corner panel (H) face down on a
smooth, flat surface. Attach the support leg (J)
using a bolt (AA) and washer (BB) as shown
and tightening securely.
4
F
5
A
6
J
5
AA
BB
AA
BB
H
AA
BB
Publicité
