Publicité
ASSEMBLY INSTRUCTIONS
3. Place 2 - 3 drops of air tool oil
(not included) into the male plug before
each use (See Figure 3).
4. Select the correct impact socket (not
included) and mount it onto the anvil (B)
until it clicks into place (See Figure 4).
Use only adapters and sockets with a torque
rating equal to or greater than the tool itself.
Always make sure adapters and sockets
are properly mounted and secure before
using the tool. Loose attachments can
break or fly off, causing serious injury to the
operator or bystanders in the work area.
Always follow all manufacturers'
specifications for proper attachment and
use.
5. Connect air supply hose to the male plug.
Set the working pressure at 90 PSI for
best tool performance (See Figure 5).
WARNING
3
4
5
F
11
B
Publicité
