Publicité
CYCLE GUIDE — SENSOR DRY/AUTOMATIC DRY CYCLES
SENSOR DRY/AUTOMATIC DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness
level. Choose ENERGY PREFERRED cycle for optimal energy savings.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you like,
select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
TIMED DRY - Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Items to dry:
Heavy or bulky
items
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High Heavy temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low Delicate to Medium Casual temperature setting may be
used for drying medium-weight items such as sheets, blouses,
dresses, underwear, permanent press fabrics, and some knits.
6
Dryness Level:
Temperature
Fabric:
More or Very Dry
High Heavy
or
Energy Preferred
High Heat
Less Dry
More or Very Dry
Medium Casual
or
Energy Preferred
Low Heat
Less Dry
More or Very Dry
Low Delicate
or
Energy Preferred
Low Heat
Less Dry
Cycle:
Temperature:
High Heat
High
Freshen Up
Any
Timed Dry or
Air Fluff or
Air Fluff
No Heat
Available
Options:
End of Cycle Signal
Automatic cycles give the best drying in the
shortest time. Drying time varies based on
Wrinkle Prevent
fabric type, load size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
End of Cycle Signal
lower setting rather than the higher setting.
Wrinkle Prevent
End of Cycle Signal
Wrinkle Prevent
Available
Options:
End of Cycle Signal
Completes drying if items are still damp.
End of Cycle Signal
Use low to medium temperature to
smooth out wrinkles, such as those found
in clothes packed in a suitcase or in items
wrinkled from being left in the dryer too
long.
End of Cycle Signal
No heat drying.
Use the Air Fluff (no heat) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details:
Publicité
