Maintenance; Declaration Of Conformity - Leb electronics CTR57 Manuel D'emploi

ENGLISH
Terminal board J2
Terminal 1 - Electric contact N.C. of the photocell
Terminal 2 - Common terminal for all electric contacts
Terminal 3 - Positive photocell 12Vdc power supply
Terminal 4 - Negative photocell 12Vdc power supply
Important: The normally closed inputs not in use must be fitted with jumpers.
Terminal board J3
Terminal 1 - Positive blinker 24Vdc power supply
Terminal 2 - Negative blinker 24Vdc power supply
Terminal 3 - Power supply for motor M1
Terminal 4 - Power supply for motor M1
Terminal 5 - Power supply for motor M2
Terminal 6 - Power supply for motor M2
D) MAINTENANCE
Warning: The maintenance of the device is to be carried out only and exclusively by a specialized technician authorized from the Manufacturer.
Any operation of maintenance or control of the device must be carried out without power supply.
Ordinary maintenance: Every time that it is necessary and however every 6 months it is recommended to verify the device working.
Extraordinary maintenance: In case of failure, remove the device and send it for repair to the manufacturer's laboratory or to an authorized
laboratory.
The Manufacturer is not responsible for missing observance of rules above described.
E) DECLARATION OF CONFORMITY
Description of the unit: Electronic board for the control of 2 motors supplied with 24Vdc voltage intended for the automation of a swing gate.
Model: CTR57
Applied rules: EN 61000-6-3, EN 61000-6-1, EN 301489-1, EN 301489-3, EN 300220-2, EN 300220-1, EN 60950-1
Test laboratory : NEMKO SPA
Outcome: Positive
The manufacturer declares that the above listed products comply with rules provided for by European directives 2004/108/EC and 2006/95/EC.
Date: 04-05-2018
22