Publicité
Connecting a PC (Personal computer)
Viewing an image from a PC
Use the INPUT4 (PC) terminals to connect a PC.
e The PC input terminals are DDG1/2B-compatible.
* Refer to "PC compatibility chart" for a list of PC signals compatible with the System.
+ Make sure to select the same signal values for the output signal of a PC and the input signal of the TV/DVD set before
connecting with the PC. (See page 23.)
¢ Depending on the PC being used, images may not be shown without converting the output signals into externa! output.
Please refer to your PC's manuals regarding converting to externai output.
Connecting the RGB cable
Mi
+ Connect the RGB cable making sure
that it fits correctly into the terminal.
Then, firmiy secure the connectors by
tightening the screws on both sides
of the plug.
To ANALOG RGB
output terminal
S
AUDIO
CUE
Po
co
lE
AGB cable
\ (commercially available) |
E)
zo
63.5 mm stereo minijack cable
{commercially avallable)
Ta AUDIO PC/HDMI
To Audio output
terminals
input terminal
| PinNo. | Signalname | PinNo. | _ Signal name |
COSp
R A
O
(o
|
G
|
©
| GND (Ground) |
SO
j
B]
O
©
| GND(Ground) | @ |
VGAHS
|
540 x 480
GND (Ground)
VGAVS
| GND (Ground) | (B| Notconnected |
GND (Ground)
[|
d
on
|
B48x 480
Displaying
an image from a. PC.
me
svGA | enox6on
To view an image from a PC, perform the following
procedure.
O Select the Input4 (PC) mode using INPUT on the remote
contro! or the TV/DVD set. (See page 14.)
© Select the PC input signal.
O Adjust the "Picture." items if the PC image does not come
in clearly. (See page 23.)
XGA
1,024 x 768
à
1,280 x 720
WXGA
4,280 x 764
1,360 x 768
1,280 x 1,024
1,440 x 900
640 x 480
1,024 x 768
E
wN
Publicité
