Publicité
Watching TV
EE
AAA
A
A
a"
Skipping stored channel
You can set channel selection disabled using CH fvw.
1
Press TV MENU and the MENU screen displays.
2
Press a/¥ to select "Channel", then press » or ENTER.
3
Press a/¥ to select "Add/Delete", then press » or
ENTER.
4
Press a/¥ to select "Add/Delete", then press » or
ENTER.
5
Press a/¥ to select the channel that you want to skip.
Press «/» to select "Delete" for selected channel.
7
Press EXIT to return to the normal screen.
o
* To add a digital channel you are watching:
Select a channel you want to add. Then select "Adding
Channel' in step 4, press » or ENTER.
* To reiease the skipping channel:
Select "Add" in step 6.
Clear All
All channels are deleted from the channel memory.
Press TV MENU and the MENU screen displays.
Press a/v to select "Channel", then press » or ENTER.
Press a/y to select "Add/Delete", then press » or
ENTER.
Press 4/v to select "Clear All', then press » or ENTER.
Press EXIT to return to the normal screen.
or
ON
Display the channel information
Press DISPLAY to display the current channel (or
input source) information on the screen.
When the TV receives a digital signal, the digital information
will appear for a few seconds.
» Channel number
e Station name
* Channel label (if preset) + Broadcast program name
* V-Chip rating
« Signal type
+ Sleep timer
+ Audio language
» Program guide
» Picture size
« Resolution
When the TV receives a analog signal, the analog
information will appear.
* Channel number
+» Channel label (if preset)
¢ V-Chip rating
+ Signal type
* Sleep timer
+ Audio information (Stereo or SAP}
« Picture size
* Resolution
Setting MTS/SAP stereo mode
The TV/DVD has a feature that allows reception of
sound other than the main audio for the program.
This feature is called Multi-channel Television Sound
(MTS). The TV/DVD with MTS can receive mono
sound, stereo sound and Secondary Audio Programs
(SAP). The SAP feature allows a TV/DVD station to
broadcast other information, which could be audio in
another language or something compietely different
like weather information.
You can enjoy Hi-Fi stereo
sound
or SAP
broadcasts where available.
« Stereo broadcasts
View programs like live sporting evenis, shows and
concerts in dynamic stereo sound.
« SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
e Obtain a clearer sound by manually switching to fixed
mono-sound mode.
e
= Ik
4!
in
Q
a
w
o
ya]
D m
œ
n
£ 2.
o
=
3
a
a
@
MTS is available only when receiving analog broadcasting,
not when receiving digital broadcasting.
When the TV receives a stereo or SAP broadcast, the
word "Stereo" or "SAP" displays on-screen if you press
DISPLAY.
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.
1 In analog TV mode, press AUDIO and the "Audio"
menu screen displays. "MTS" will be highlighted.
2 Press AUDIO again or </» to select "Stereo",
"SAP" or "Mono".
3 Press EXIT to return to the normal screen.
When two or more audio languages are included
in a digital signal, you can select one of the audio
languages.
1 in digital TV mode, press AUDIO and the "Audio
Language" menu screen displays.
2 Press a/v or 0-6 to select your desired language.
3 Press EXIT to return to the normal screen.
» Digital audio language is active only when receiving digital
boardcasting, not when receiving analog boardcasting.
Publicité
