iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i i iii! ! iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
• Electrical
power cord may not be
plugged in or connection
may be
loose.
Washer does not
start
Washer won't spin
Door does not
open
Wash cycle time
delayed
• House fuse is blown, circuit
breaker tripped, or a power
outage
has occurred.
• Water supply tap is not turned on.
• Check that the door is firmly shut.
• The washing
time may vary by
the amount of laundry, water
pressure,
water temperature,
and
other using conditions.
• Does not dry
Dry problem
Make sure plug fits tightly in wall
outlet.
Reset circuit breaker or replace
fuse.
Do not increase
fuse capacity.
If problem
is a circuit overload,
have it corrected
by a qualified
electrician.
Turn on water supply tap.
Close the door and press the
Start/Pause
button. After pressing
the Start/Pause
button,
it may
take a few moments
before the
clothes washer
begins
to spin.
The door must lock before spin
can be achieved.
Once started, the door can not be
opened
for safety reasons.
Wait one or two minutes
before
opening
the door to give the
electric
locking mechanism
time
to release.
If an imbalance
is detected
or if
the suds removing
program
operates,
the wash time shall be
increased.
Do not overload.
Check that the washer
is draining
properly
to extract adequate
water from the load.
Clothes
load is too small to
tumble properly.
Add a few towels.