Publicité
B
Using the appliance
Hob controls
Heating element
The heating element is controlled by a 6-position button.
The heating element is controlled by the corresponding controller, which must be set to the
required setting. Beside each controller is a symbol that indicates which element is controlled
by the controller. The on/off indicator light on the control panel indicates whether one of the
heating elements is in use.
Button position
IMPORTANT
The direction of rotation of the button varies depending on
the product's characteristics.
Double and oval cooking zone (if available)
The double and oval cooking zone is composed of two cooking zones. To activate the outer part
of a double/oval element, turn the button to the
To deactivate the outer part of a double/oval element, turn the button to the Off position. The
two exterior zones switch off.
Residual heat indicator (if available)
After using the hob, some of the heat will remain stored up in the ceramic surface. This is
the residual heat. If the residual heat level is above +60°C, the residual heat indicator of the
cooking zone concerned will light up. If the power supply to the hob is cut off while the residual
heat indicator light is on, the warning light will flash when the power is restored. The display
flashes until the residual heat has dropped or one of the cooking zones is activated.
Using the appliance
0
Off position
1
Keep warm position
2-3
Low heat position
4-5-6
Cook, sear and boil position
10
Function
position. The two exterior zones light up.
EN
Publicité
