Haier LET32T1000HF Manuel D'instructions page 16

Getting started
Insert the CAM correctly, then insert the Smart Card
to the CI slot located on the side of the TV.
When you switch on the TV, a message will be
displayed confirming that the CA module has been
detected. Wait for few moments until the card is
activated.
Press OK to enter, then use the
select the option you need and press OK.
Detailed information about the CI card is displayed.
Press OK to access the card menu. Refer to the
module user's manual for information about the
settings.
EN-15 Digital LED LCD television user's manual 15 Digital LED LCD television user's manual Digital LED LCD television user's manual
CI Slot
CAM
Smart Card
 
and buttons to
Using your TV
Selecting a TV channel
Use the channel number buttons: Enter the channel
number with the number keypad on the remote
control.
Use the P+/P- button:
Press the P+/P- button to select a channel number.
Adjusting the volume
Press the V+/V- button on the remote control or at the
bottom of the TV to adjust the volume level.
Adjusting the picture
settings
Changing the picture settings
Press the MENU button, press  to select Picture,
then press OK to enter.
Press  to select the item that needs to be
adjusted.
Press  to adjust the selected item.
When you are satisfied with your choice, press EXIT
to return to normal viewing or MENU to return to
the previous menu.