Publicité
Style 2
L,e,_, (I ii a=_e!
3. Using a level, be sure that the refrigerator is still level side to
side. Readjust if necessary.
REFRIGERATOR USE
Your refrigerator may have either dial or electronic controls. Follow
the instructions specific to your model.
IM PO RTANT:
•
Wait 24 hours for your refrigerator to cool completely before
adding food. If you add food before the refrigerator has cooled
completely, your food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a
colder than recommended
setting will not cool the
compartments
any faster.
The recommended
settings should be correct for normal
household refrigerator use. The controls are set correctly
when milk or juice is as cold as you like and when ice cream is
firm.
•
If the temperature is too warm or too cold in the refrigerator or
freezer, before adjusting the controls, first make sure the air
vents are not blocked.
T_ ! _
For your convenience, the controls are preset at the factory. When
you first install your refrigerator, make sure that the controls are
still preset to the recommended
setting as shown.
Recommended-setting
"3"
normal
o.V!_J ._t
To Turn OFF:
Turn the refrigerator control to the word OFE Your refrigerator will
not cool when the refrigerator control is set to OFE
Adjusting Dial Control
If you need to adjust temperatures,
use the settings listed in the
chart below as a guide. On models with two controls, adjust the
refrigerator temperature first. Wait at least 24 hours between
adjustments and then recheck the temperatures.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
TEMPERATURE Control
one setting higher
FREEZER too warm/too little ice
TEMPERATURE Control
one setting higher
REFRIGERATOR too cold
TEMPERATURE Control
one setting lower
FREEZER too cold
TEMPERATURE Control
one setting lower
8
Your refrigerator features an easy to use electronic control panel
located on the front of the freezer compartment
door.
•
To conserve power, the display screen will dim and remain
unlit until you press a button. Once you touch any button, the
display screen lights up to enable you to select the desired
control feature.
The electronic control panel displays the internal temperature
of each compartment.
For your convenience, your refrigerator controls are preset at
the factory. When you first install your refrigerator, make sure
that the controls are still preset to the recommended
setting
as shown.
•
By default, temperatures are displayed in Celsius. To switch to
Fahrenheit, press and hold the Temperature button for
3 seconds.
Recommended
settings
VACATION MODE
u_c
FAST FREEZING
®
CANCEL/HOLD
TENPERATURE
ADJUST
Q
LIGHT
___
FreshFIow
air
filter
To Turn OFF:
Unplug the refrigerator.
Adjusting Temperature Controls
When you adjust the temperature of one compartment,
the
control will automatically act to balance the temperature of the
other compartment
to attain an energy and performance
balance.
Except when first turning on the refrigerator, do not adjust
either the refrigerator or freezer compartment temperature
more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.
To Adjust Set Point Temperatures:
1. Press the Temperature button. Both sections of the display
screen will start to blink. If they do not, press the Temperature
button again.
2. Press the Adjust button until the desired temperatures
appear.
3. Press the Temperature button again to set the temperature,
or
wait 15 seconds and the new settings will be saved. The
display screen will stop blinking.
G
TEMPERATURE
Publicité
