Reversing The Door - Domo DO911WK Mode D'emploi

www.domo-elektro.be

REVERSING THE DOOR

Caution:
• Make sure that the appliance is empty and disconnected from the power net.
• To reverse the door, you need to tip the appliance backwards. Make sure that the
appliance can lean on something firm and stable, so that it does not slip away
while reversing the door.
• All removed objects are still needed to reinstall the reversed door.
• Do not lay the appliance flat, this could damage the cooling system.
• It is recommended to execute the assembly with 2 people.
1. Remove the top hinge cover with a flat screw driver.
2. Unscrew the top hinge.
3. Remove the hole cover on the other side of the door with a flat screw driver.
4. Move the core cover in the door from the one side to the other.
5. Unscrew the bottom hinge and the two levelling feet. Lift the door and place the
door on a soft surface to avoid scratching.
6. Unscrew and remove the bottom hinge pin, turn the bracket over and screw the
hinge pin back in again.
7. Install the hinge at the other side on the bottom of the appliance. Reinstall the
levelling feet.
8. Place the bottom door on the bottom hinge. Make sure that the hinge is inserted
into the opening at the bottom of the door. Move the hinge hole cover at the top of
the door from the one side to the other.
9. Install the upper door with the upper hinge.
10. Click the hinge cover and the hole cover back on top of the appliance.
39
DO911WK