Télécharger Imprimer la page

Brentwood Appliances H-C1603BK Mode D'emploi page 5

Publicité

OPERATING INSTRUCTIONS
Attention: During the first use the heating element undergoes a minor chemical
reaction that may result in a slight odor and/or minor smoking. It quickly goes away.
1.
Choose Your Power Setting: II HIGH: 1500 watts I LOW: 750 watts FAN ONLY (no
heat) 0 OFF
NOTE: The HIGH setting can be used to warm the room quickly; when a comfort
Level has been reached, the LOW setting can then be used to conserve electricity.
2.
Set the Thermostat (for use with HIGH and LOW power settings) or use the Fan.
Setting the Thermostat:
a.
Turn the Temperature Control Switch clockwise, to the highest setting.
b.
When the desired room temperature is reached, slowly rotate the temperature
Control Switch counter-clockwise until the heater turns off automatically.
NOTE: Your heater will now turn on and off automatically to maintain the
desired room temperature.
Fan:
a.
Turn the Power Control Switch to the FAN ONLY setting.
b.
Turn the Temperature Control Switch clockwise, to the highest setting, or to the
point at which the fan turns on to maintain the current temperature.
NOTE: Although the Fan operates off the thermostat, no heat will be
generated when the Power Control Switch is in the FAN ONLY position.
Cleaning Instructions:
1.
Turn the Power Control Switch to the '0' position. Disconnect the power cord from
the electrical outlet.
WARNING: Do not expose the heating elements or switches to water, cleaning
liquids or other chemicals, as fire, electrical shock, personal injury and properly
damage can occur.
CAUTION: Do not use gasoline, benzene or thinner to clean your heater, as these
chemicals can cause surface damage.
2.
Use a vacuum cleaner with a crevice tool to remove dust from the interior or your
heater.
3.
Use a clean, soft, and lightly damp cloth to gently wipe the surface of the enclosure.
4.
Allow the enclosure to dry completely prior to operating your heater.
OFF-SEASON STORAGE INSTRUCTIONS: Secure the power cord, and place your heater in
its original shipping container, or a similar container. Store the container in a cool, dry
location.
5

Publicité

loading