Publicité
OC 0013
PAIR OF STEPS
CONTENTS
Bits:
- slotted 5-6-8-10-12mm
- hex 4-5-6-8mm
- Phillips 1-2-3-4
- Torx 40
INSTRUCTIONS
Adjust the spindle in Forward (R) or Reverse (L) position as illustrated hereunder.
Grip the handle and strike on the head with a hammer giving light pressure along with the direction
of the drive required (right or left turn).
FORWARD
REVERSE
For bolts & nuts
Use your socket after taking the bit holder out and adopt the same procedure as above.
Publicité
