Publicité
Operating Instructions
3.
Pull the hose out to the desired length. The hose will automatically lock in position.
4. To unlock and retract, give the hose a short pull. Walk the hose back to the hose reel.
Caution: Always hold the hose until it completely
Retract into the hose reel
Adjusting the stop-ball
The location of the stop ball can be adjusted to allow more or less hose exposed when fully rewound.
1, Pull out the hose to the desired length, ensuring the hose reel is locked ( will not rewind).
2, Open the latch on the ball and move it to the desired location.
3, Re-latch the ball.
Caution: Always make sure the hose reel is locked before removing the stop ball, and make
sure the stop-ball is securely fastened before unlocking the reel.
Care and Maintenance Tips
-
Turn off the water source and release the pressure in the hose when not in use.
-
To prevent freezing and potential damage to the hose reel, store indoors during winter months.
-
Clean the housing and hose using only mild soap and water.
If you are having difficulty with the user or assembly of this product, please contact Customer Service for help. We can be
reached by phone at +44 33 00271465 or via email at info@fuxtec.co.uk
Manual_FX-WSA20_FX-WSA30_Int24_rev4
Publicité
