Publicité
Choosing the best location
Select the best location to mount your hose reel
Installation: Heavy plywood cladding
If you wall's ply wood cladding is thick, 12mm (1/2") or more, you can
directly
mount the Wall Bracket
WARNING: Ensure there are no live electrical wires or
Plumbing in the wall at the location you are drilling
CAUTION: when using powder tools such as a
electric drill, please wear eye protection.
1, Using your electric drill, 3mm (1/8") drill bit, and bubble level, drill the hole
Pattern shown. Ensure that the pattern is level.
2, Moun Wall Bracket (D) to the wall using srews/washer (B.2.)
3, Hag Hose Reel (C) on wall bracket (D)
4, Connect the leader hose to water source
Installation: Masonry Wall - Use this method for stone or brick walls....
WARNING: Ensure there are no live electrical wires or
Plumbing in the wall at the location you are drilling
CAUTION: when using powder tools such as a
electric drill, please wear eye protection.
1, Using your electric drill, 9,5mm (3/8") drill bit, and bubble level, drill the
hole
Pattern shown. Making each hole about 2" deep.
Take care to ensure that the pattern is level
2, Remove the nut, lock, washer, and flat washer from the expansion bolt
(B.1.)
3, insert the expansion bolts (with sleeves) into the holes
4, Mount the Wall Bracket (D) on to the bolts, then assembled the nut, lock
washer, and flatwasher, Tighten the nut until the expansion bolt is secure.
5, Hang Hose Reel (C) on wall bracket (D)
6, Connect the leader hose to water source
Manual_FX-WSA20_FX-WSA30_Int24_rev4
1, Near your worksite. Your hose reel comes with up to 30m (100ft) of hose,
Think about where you need to water and make sure the hose can reach.
2. Near a spigot. This hose reel is provided with a 2m (6.5ft) leader hose, so
selection a location close to the spigot
3. On a sturdy wall or structure. There are many options for mounting this
hose reel into various structures, but it's important that the structure be sturdy
enough to support the weight of the reel, up to 14.5kg(32lbs) with water
4. In the shade. By mounting your hose reel in a shady area of your yard, you
can reduce harmful effects of sunlight on the reel and hose and extend the life of
your purchase.
Lock washer
nut
(D)
(no be included)
(D)
(B.1.)
Insert in this
direction
sleeve
expansion bolt
flat washer
76mm
208mm
80cm
(recommended)
76mm
208mm
80cm
(recommended)
Publicité
