Publicité
• It is not recommended the use of sealing putty in this product and, anyway, you should use only products spe-
cifically conceived to work with ABS, all those products of universal use remain excluded.
• The projector is designed TO OPERATE ONLY WITH A SAFETY TRANSFORMER.
• The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric
components which have been inserted or handled at locations other than its own premises.
• It is responsibility of the installer to ensure that no water gets inside the projector by means of the cables.
• The STD projector is not designed to work submerged in seawater.
• The Global projector is seawater resistant.
• This projector is resistant to pool treatments described below, always that the concentration values do not
exceed the following levels:
Chlorine
Bromine
Salt electrolysis (Na Cl)
Attention : Please note that the Ph of pool water always must be between 7.2 and 7.6.
TYPE OF TREATMENT
CONCENTRATION IN WATER
2 mg/l
5 mg/l
6 g/l
4
Publicité
