Publicité
GB
Note: Clean and grease the shaft of the tool
before inserting.
► P. 3, fig. 3
– Pull the tool holder (1) back.
– Insert the required tool with a slight turn until the
tool holder locks.
Selecting the operating mode
NOTICE! Risk of damage to the unit!
Only change operating mode when the
device is switched off.
NOTICE! Risk of damage to the unit! Do
not use settings [
in and removing screws. Do not use set-
tings [
] and [
► P. 4, fig. 4
Press the lock button (3); set the switches (2) and (6)
to the required operating mode:
• Use switch (2) in position [
tion [
]: For drilling without the hammer func-
tion into wood, metal, ceramics and plastics and
for the screwdriver function.
• Use switch (2) in position [
tion [
]: For hammer drilling in cement or stone.
• Use switch (2) in position [
tion [
]: For chasing in cement or stone.
Check before switching on!
Check to make sure the unit is in a safe operating
condition:
– Check to make sure there are no visible defects.
– Check to make sure all unit components are cor-
rectly mounted.
Switching on and off
– Switching on: Press down the On/Off switch (5).
– Switching off: Release the On/Off switch (5)
again.
Error/Fault
Tool holder does not turn.
Chuck is turning, but the device
is not drilling.
No hammer drilling function.
No chasing function.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
26
] and [
] for screwing
] for chasing.
], switch (6) in posi-
], switch (6) in posi-
], switch (6) in posi-
Cause
No power supply?
Is the device defective?
Revolution direction set incorrect-
ly?
Mode switch is not set correctly? ► Selecting the operating mode – p. 26
Drilling
DANGER! Risk of injury! Never hold the
work piece that you are working with in your
hand, on your lap, or against other body
parts.
NOTICE! Risk of damage to the unit!
Never use the drill for chasing or to expand
drilled holes.
Always use a drill appropriate to the mate-
rial.
– Hold the device straight and drill with even pres-
sure.
Cleaning and maintenance
Cleaning overview
Regularly and according to the operating condi-
tions
What?
Clean the ventilation slots
of the motor to remove
dust.
Clean the device.
Lubricating the unit
Lubricating the unit
– Unscrew the lid (4) and fill with grease (recom-
mended grease: ► Technical data – p. 27).
Troubleshooting
What to do when something doesn't work...
DANGER! Exercise caution – risk of
injury! Unprofessional repairs may mean
that your unit will no longer operate safely.
This endangers you and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedy
Check the cable, plug, and the fuse.
Contact your local vendor.
Switch the rotation direction reversing
switch
with household waste. They may contain substances
that are harmful to the environment and human
health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
How?
Use a vacuum, cleaning
brush or paint brush.
Wipe the unit with a damp
cloth.
► Lubricating the unit –
p. 26
Publicité
