Publicité
Figure 10: Wiring Harness Tucked Between Air Cleaner and Plastic Panel (Driver Side Shown)
17. Reinstall the air cleaner lid and screen.
18. If equipped, connect the light bar harness(es) to the factory wiring harness. See Figure 11 for where to look for the factory
harness. These are a suggestion only as the configuration of the truck may change the location of the factory harness.
Figure 11: Possible Location of OEM Wiring Harness
19. Peel the remaining protective plastic and clean with glass cleaner and a soft cloth as needed.
Page 6 of 18
00813117
08/2024
Publicité
