Publicité
Problem solving
The following table contains a list of common problems, their causes and
solutions that may help you when using the KLAMER Radiator:
Problem
Cause
The oil radiator
The power plug is not
does not heat up
plugged in.
The target temperature
has been reached.
Oil leaking from
Oil seal is damaged.
the device
Oil radiator was moved
improperly.
Crackling noise
There are air bubbles in
during operation
the oil.
The oil radiator
The air circulation is
becomes
blocked.
excessively hot
The thermostat is
defective.
The device does
The power plug is
not switch on
defective.
The fuse is blown.
The device emits
New smell at first use
an unpleasant
odor
There is a foreign object
on the radiator.
The oil radiator
One or more feet are
wobbles
uneven
The surface is uneven
Solution
Insert the power plug into a power outlet
Set the thermostat to a higher position.
Contact the KLAMER customer service team.
Contact the KLAMER customer service team.
Switch off the device and let it cool down, then
switch on again
Make sure that the radiator is free from
obstacles.
Contact the KLAMER customer service team.
Contact the KLAMER customer service team.
Contact the KLAMER customer service team.
Operate the device for a few hours in a well-
ventilated room. The smell is harmless to health
and disappears after some time.
Clean the radiator thoroughly and remove all
objects from the device.
Press the wheel element in with some force and
retighten the wing nuts completely to the stop.
Place the radiator on a flat surface.
28
Note
Please contact the KLAMER Customer Support Team at
hello@klamer-home.com with any questions or uncertainties. We will be
happy to help you!
29
Publicité
