Press the
button 3× and use the
(-3 °C to +3 °C in 0.5 °C increments).
Confirm with
Time Synchronisation (SYNC)
Long-press the
Press the
button 4× and use the
ON – time will be automatically synchronised with the Wi-Fi network;
OFF – time will not be synchronised with the Wi-Fi network and the time you
set manually will be used.
Confirm with
Software Version
Long-press the
Press the
button 5×; the software version of the thermostat will be displayed.
Return by pressing
Resetting the Thermostat (rESE)
Long-press the
Press the
button 6×; rESE will appear on the screen.
Press the PRG button; -- -- will be displayed.
Press the PRG button again; the thermostat's menu will be reset and all set
values will be deleted.
Key Lock
Long-press the PRG button for about 3 seconds.
All buttons will be locked, the thermostat will flash LOC in the top left of the
screen and the
To cancel the lock, hold the PRG button again for about 3 seconds; UNLO will
flash on the screen.
Setting the lock in the mobile app:
– lock activation,
Attention:
If you activate the lock in the app, the lock can also be cancelled using the PRG
button on the thermostat.
Upkeep and Maintenance
The product is designed to serve reliably for many years if used properly. Here
are some tips for proper operation:
• Read the manual carefully before using the product.
• Do not expose the product to direct sunlight, extreme cold and humidity and
sudden changes in temperature. This would reduce measuring accuracy.
• Do not place the product in locations prone to vibration and shocks – may
cause damage.
• Do not subject the product to excessive force, impacts, dust, high tempe-
ratures or humidity – doing so may cause malfunction, shorten battery life,
damage batteries and deform plastic parts.
• Do not expose the product to rain or high humidity, dropping or splashing
water.
.
button for about 5 seconds.
.
button for about 5 seconds.
.
button for about 5 seconds.
icon will be displayed.
– lock deactivation
buttons to set the calibration value
buttons to set:
22