Télécharger Imprimer la page

Emos P56211 Mode D'emploi page 16

Thermostat sans fil

Publicité

5. Thermostat mode icon
heating
cooling
off
6. Work mode icon
7. Adjust temperature
8. Current room temperature
9. Current set temperature
10. Adjust temperature
11. Network information about the device, change the name in the app,
location information, add an icon to the home screen and other similar
settings
Deleting the Thermostat from the App (see fig. 11)
Long-press the thermostat icon, check off the thermostat and tap the dustbin
icon to delete the thermostat.
User Overview/Password Change/App Update
Tap the
icon in the bottom right and then the
This will open a new menu with settings.
INSTALLATION
Attention:
Before changing the thermostat, disconnect the heating system from the mains
power in your home. This will prevent potential injury by electric current.
Installing the Thermostat (see fig. 2)
Place the thermostat in the stand included in the pack.
Connect the USB power supply (included) with the connected micro USB cable
to 230 V mains.
Plug the micro USB cable into the bottom of the stand.
Placement of the Thermostat
The placement of the thermostat (transmitter unit) significantly affects its
functioning.
Choose a location where members of the family spend most of their time,
preferably near an inside wall where air circulates freely, with no direct sunlight.
Do not place the thermostat in the vicinity of heat sources (such as TV sets, radi-
ators, fridges), or close to a door. Failure to comply with these recommendations
will prevent proper control over room temperature.
icon in the top right.
16

Publicité

loading